General Tips About Application:

Application Do's...

• Apply when the surface and air temperature is between 10ºC and 35ºC (50ºF and 95ºF).
• Stir well before using.
• Saturate all end grains, nail holes, cavities and cracks in the wood.
• Maintain a wet edge to prevent lap marks.
• Apply in the direction of the wood grain.

Application Don'ts...

• Do not apply in direct sunlight.
• Do not apply when the surface is hot to the touch.
• Do not apply when dew, rain or frost is present or expected within five hours.
• Do not apply when moisture content of the wood is greater than 18%.
• Do not thin.

Smart Tip...

It is always recommended to perform a colour test on a sample of the wood used in the project with the number of coats required. This will confirm the colour you will obtain.